

Penguin 1 Series
IP65 stainless steel kitchen display system in 21.5″ or 15.6″ FHD. Octa-core processor, Android 15, Wi-Fi 6, Bluetooth 5.4 and Gigabit Ethernet, with optional PoE++ for power and data over one cable. Anti-oil coating and 10-point glove-compatible touch. Managed fleet-wide through KiwiCloud UEM.
- Description
- Reviews (0)
- Full Specification
- Download
Description
Penguin 1 Series โ The Commercial Kitchen Display System That Doesn’t Go Down
A dead screen on the pass isn’t an IT problem, it’s a service problem. Tickets go back to paper, the expo starts shouting, and covers slow down for the rest of the night. The Penguin 1 Series exists to make that night impossible: food-grade SUS304 stainless steel, full-body IP65 sealing, and a fleet you manage from a desk instead of a van.
Built for grease, steam and the pressure wash
Kitchens destroy ordinary screens. IP65 protection means dust can’t get in and water jets from any direction can’t either, so grease films, steam and cleaning residue stay on the outside of a sealed stainless body. The panel handles full commercial cleaning routines instead of a nervous wipe-down. And with a โ10ยฐC to 50ยฐC operating range, you place it by the fryer or at the cold-store exit without thinking twice.
Every ticket lands, every time
Orders arrive from every channel exactly as entered โ nothing lost, duplicated or misread on the way from POS to screen. A one-tap completion signal fires back to front-of-house in real time, so nobody relays anything verbally. And because a 1920ร1080 FHD panel replaced the ticket roll, modifiers and allergen notes read the same at 9pm as they did at open. No smudges, no reprints, no comped covers.
Works with the hands your staff actually have
The 10-point G+G capacitive touch layer registers rubber, latex, polyethylene and cotton gloves, and stays accurate through wet or greasy fingers โ no stripping PPE between tasks. An anti-fingerprint, anti-oil coating keeps the glass readable across a 170ยฐ viewing angle for a full service, at 400 nits on the 21.5″ or 250 nits on the 15.6″. Dual 3W speakers cut through extraction noise to announce new orders, changes and timeouts; dual microphones support voice confirmation without extra hardware.
Live in an afternoon
PoE++ (IEEE 802.3bt) runs power and data down one cable, so there’s no new circuit, no contractor and no closing the kitchen to schedule an electrician. The unit auto-starts on power. Universal VESA compatibility covers wall, counter and arm mounts with no structural modification. Wi-Fi 6, Bluetooth 5.4 and Gigabit Ethernet hold the POS connection through peak network load, and an octa-core processor with 6GB RAM on Android 15 keeps the interface responsive when tickets stack.
Ten sites, one dashboard
KiwiCloud UEM turns a fleet into a single screen. Devices auto-enrol on first power-up with policies already applied โ no on-site IT. Kiosk mode locks each unit to approved apps so nobody exits, installs or tampers, which removes the most common reason a display goes dark mid-shift. Push updates everywhere at once to stop version drift, and diagnose, reboot or reconfigure remotely so most incidents close in minutes rather than a callout.
Cleaner kitchen, smaller paper bill
Removing the thermal ticket printer removes a roll cost, a contamination surface and a consumable that runs out mid-rush. Non-porous stainless steel reduces bacteria harbourage, and sealed construction means the display is part of the cleaning routine rather than an exception to it.
Two sizes, two tiers โ Penguin 1 and Penguin 1 mini (21.5″/15.6″, WLAN 6, Android 15, optional PoE++); Penguin 1 Pro and Pro mini (WLAN 6E, Android 16, Bluetooth 6.0, PoE++ standard).
Be the first to review “Penguin 1 Series” Cancel reply
Processor
Hexa-core ARM Cortex-A55 1.8GHz)
Memory
Penguin 1 mini: 6GB RAM + 64GB ROM, 6GB RAM + 64GB ROM (PoE)
Display
Multi-point Capacitive Touch Panel
Operating System
Connectivity
Bluetooth 5.4
Speaker
Protection Level
(without optional peripherals)
Environment
Adapter๏ผOperating -10 ~ 45โ, Storage -20 ~ 60โ
Dimensions
21.5หฎ๏ผ510.5 x 302.7 x 34.3mm
Weight
21.5หฎ๏ผ4.56kg
Button
Scanner (optional)
Power Adapter
Output: DC 24V/2.5A
Peripheral Ports
(Support OTG & Debug), RJ45 x 1



















Reviews
There are no reviews yet.